8615725001800

Categories

Home > Products > SSI Absolute Encoder factory
Contact Us

Weihai IDENCODER Electronic Technology Co.,Ltd

Tel:8615725001800

Fax:86-0631-5995628

E-mail: fangshuwei@idencoder.net

Address:Building 1,the fourth Industry Park ,Weihai China

SSI Absolute Encoder factory

  • Pull Box Encoder

    Contact Now

    Pull Box Encoder

    Product Introduction: This series of products are very suitable for the measurement of the position of cylinder piston and the position of object, also, it’s suitable for the dimension survey and the position control of linear guiding system, cylinder system, scalable system, mechanical presses,...

  • EV Magnetic Induction Encoder

    Contact Now

    EV Magnetic Induction Encoder

  • Textile Machinery Absolute Encoder

    Contact Now

    Textile Machinery Absolute Encoder

    Description of Products: 1.The flange form is clamping flange 2.Screw hole card slot installation 3.Key body dimension is 58mm 4.Diameter of axle is 10mm; 5.Side-out cable; 6.The resolution is 1024 7.The output code system is Gray Code. 8.Working voltage is 8-29V 9.Parallel NPN Collector Output...

  • Absolute Encoder with Canopen Interface

    Contact Now

    Absolute Encoder with Canopen Interface

    Basic Info Trademark:IDENCODER Product Description * International standard CANopen bus line type, max. 1MHz bit rate. * Support NMT node protection or heartbeat message, support multi master redundant backup, support LSS layer setup, self-detective, error-correcting, redundancy, and the system...

  • Hollow Encoder For Elevator

    Contact Now

    Hollow Encoder For Elevator

    Features and Usage: *Full-hollow *External diameter: Ф120mm *Thickness: 55mm *Bore diameter of shaft: Ф42mm, Ф45mm, Ф50mm. Ф55mm. Ф60mm、Ф80mm etc. *Blade spring is directly connected with the hollow shaft and user’s shaft, whose installation is convenient and reliable. * Industrial rugged type,...

  • Altimeter Encoder

    Contact Now

    Altimeter Encoder

    SSI Multi-Loop Absolute ADK- F58L10-MA4096/8192G4SLP ●Resistant to shock, anti-interference, high reliability. ●Varies of working voltage are selectable. ●Varies of resolution ratio are selectable, maximum can attain 65536 circles, single circle is 65536 ●Varies of output code system ●Component...

  • Crane Monitoring Encoder

    Contact Now

    Crane Monitoring Encoder

    MODBUS Protocol is a protocol used for PROFIBUS, it identifies that a device controller can recognize and use information frame, and it describes the process that how main station controller visits slave devices, also, it stipulates how slave devices makes response, inspects and reports...

  • Bus Type Magnetic Rotary Encoder (003)

    Contact Now

    Bus Type Magnetic Rotary Encoder (003)

    Basic Info Bus Type Magnetic Rotary Encoder The use of a bus type encoder has the following advantages: Standard Modbus interface Reducing expenditure concerning connection Good interchangeability Varieties of diagnostic informaiton and programmable parameters of the nits Features CAN open CAN...

  • Incremental Encoder 1000-line

    Contact Now

    Incremental Encoder 1000-line

    Description of Products: ●The flange form is clamping flange ●Screw hole installation ●Key body dimension is 38mm ●Diameter of axle is 6mm; ●Side-out cable; ●Incremental encoder ●Number of pulses:1000 Continuous corresponding pulses can be output when incremental rotating encoder twists. With...

  • Multiturn Absolute Module Encoder (MAM42H05)

    Contact Now

    Multiturn Absolute Module Encoder (MAM42H05)

    Basic Info Other features: Incorporates Magnetic-ASIC Technology Section dimension: 42*42 mm Hollow shaft inner diameter: 5 mm Product Description