8615725001800

Categories

Home > News
Contact Us

Weihai IDENCODER Electronic Technology Co.,Ltd

Tel:8615725001800

Fax:86-0631-5995628

E-mail: fangshuwei@idencoder.net

Address:Building 1,the fourth Industry Park ,Weihai China

8mm Rotary Encoder with Metal Shaft (F08xE)


Product Detail

Basic Info
  • Model NO.:F08xE

  • Rated Power:DC 5V, 2.5mA (1mA Min)

  • Contact Resistance:10 Ohm Max at DC 5V, 1mA

  • Insulation Resistance:More Than 100m Ohms at 250V for 1 Minute

  • Withstand Voltage:AC 300V for 1 Minute

  • Number of Detent:20 Detents (Angle: 18±° 3°)

  • Resolution:10 Pulses/360°for Each Phase. Chattering 3ms M

  • Phase-Difference:Td=T/4±t/6(in Case of No Detent)

  • Rotational Torque:20 ~ 250gf.Cm

  • Total Rotational Angle:360° Continuous

  • Push-Pull Strength of Shaft: Pull:Pull: 10.0kgf Min; Push: 10.0kgf Min

  • Trademark:IDENCODER

Product Description
F081E Series
Rotary Encoder

Feature

1. Miniature and highly accurate contact type encoder
2. 7.7 mm wide and 9.35mm high envelope
3. Incremental type

Electrical characteristics

Rated Power: DC 5V, 2.5mA (1mA Min)
Contact resistance: 10 Ohms Max at DC 5V, 1mA
Insulation Resistance: More than 100M Ohms at 250V for 1 minute
Withstand voltage: AC 300V for 1 minute
Number of detent: 20 detents (Angle: 18± ° 3° )
Resolution: 10 Pulses/360° For each phase. Chattering 3ms Max
Phase-difference: Td=T/4± T/6(in case of no detent)

Mechanical characteristics

Rotational Torque: 20 ~ 250gf. Cm
Total Rotational Angle: 360° Continuous
Push-Pull Strength of shaft: Pull: 10.0Kgf Min; Push: 10.0Kgf Min
Bushing & nut tight strength: 10.0Kgf. Cm Min

Endurance characteristics

Rotational Life: 50, 000 Cycles Min.
Load Life: 50, 000 Cycles Min with load.
Dry heat: 70C° , 240± 10H, CR is 10? Max; IR 10M? Min at DC250V.
Cold: -30C° , 1H, CR is 10? Max; IR 10M? Min at DC250V.
Damp heat: 40± 2 C, 90-95 RH for 96H, CR is 10 Ohms Max; IR 10M Ohm Min at DC 250V.